We have stumbled on the article pertaining to plumbing companies listed below on the web and accepted it made good sense to share it with you here.

Plumbers Maintenance Companies Vancouver

Pioneer Plumbing has built a reputation of honesty with our long time returning customers. We’ve found that “doing the right thing” in all aspects of our company has brought us to where we are today, and will continue to guide us into the future. Don’t hesitate to call and ask us any plumbing, heating, ventilation, or gas related questions. Chances are if you have a tricky issue, we can solve it.

We have a few goals for our clients. One is to be available for you. It is very uncommon that when you call us we are unable to make it within the same day. We give our repeat customers priority service so if you’ve used us before and you have an emergency, we are going to do what we need to, to get someone there.

Two is to be upfront and honest. From our quotes to our service techs on site, we don’t like to beat around the bush. We will let you know our concerns, our recommendations, and our opinions on how we would handle each situation as if it were our own residence where the problem occurred. We won’t tell you the job is only a 2 hour repair when we have had situations where it turned into an all day repair.

Three is to stand behind our installations and repairs. With mechanical work, it is very common for jobs to get larger or go sideways as you get into them. If we give you a quote we will stand true to the price, if we complete a job for you and you are unhappy with the finished product, we will come back and make it right. In return, all we ask is that you communicate with our office respectfully and honestly so that we can make sure at the end of the day you are happy with our services!

So next time you have a plumbing, heating, cooling, or gas question, repair, or installation you would like quoted, give us a call! Were here to help.

Plumbing Services

We’re a professional plumbing company who is able to handle all your home or business needs, including the likes of repair of leaks, routine maintenance, new installations and any type of work in commercial and residential properties. Toilet, tap or tub… whatever it is that you need you can call on us to send a certified plumber to take care of things in a respectful and competent fashion.


Repairs can vary from minor things – for example a leaky faucet – to more significant ones which are, or might become, disastrous. Our specialist plumbers can offer the skills, tools and experience to remedy almost any problem that you run across, and they’re specialists at pretty much anything from re-piping to leak detection.

We can quickly resolve any plumbing issues which could cause concern at your house or business premises. For any plumbing emergencies, please contact us. We’ve invariably got a 24-7 emergency plumber available who will be sent to your property in Vancouver as soon as is possible. Regardless of the the time of day or year, you will be able to trust in us for considerate and prompt assistance whatever you emergency. We realize precisely how annoying plumbing problems can be, particularly when it’s an unexpected emergency after the regular working day.

Every Kind of Installation

Pioneer Plumbing is proud of its long standing history of top notch work. Irrespective of whether you’d like to have a brand new kitchen sink or a bit of pipe insulation installed, or you need a total re-pipe or installation in a residential or commercial premises, we’ve got the skills and the practical experience to guarantee all jobs are done in accordance with the codes.

We’re acknowledged also as leaders in modernizing the plumbing systems of older properties, a thing we have been doing for many years, especially in a lot of the stunning homes in Vancouver’s West End.

Our first class residential and commercial plumbing service is a good choice for both modern homes and heritage properties throughout the Greater Vancouver area.




Pioneer Plumbing Repair Service

1101-1202 Harwood St
Vancouver BC, V6E 1S3
Phone: (778) 839-2040
Place ID ChIJfSdjui5zhlQRyb_bmeZDqSo

Business Hours:
Friday Open 24 hours
Saturday Open 24 hours
Sunday Open 24 hours
Monday Open 24 hours
Tuesday Open 24 hours
Wednesday Open 24 hours
Thursday Open 24 hours

Types of Plumbing and Pipe Fittings

Types of Pipe Fittings





Double Tapped Bushing


Mechanical Sleeve


Plug and Cap







Adaptors connect pipes that are not the same type. Because an adaptor can be male or female on one end, it can turn a pipe male or female.

If ends are non-threaded, they are left to be welded, soldered or glued to the pipe. Adaptors are used for PVC and copper piping.


A barb connects hoses to pipes. It is usually male at one end. The other has a barbed tube, which is a ridged and tapered cone.

It may also have a type of clamp to keep it secure. Barbs are made of plastic if they carry cold water and brass if they carry hot water.


A coupling makes it easy to connect two pipes that have the same diameter and are the same type. It’s also used to repair a broken or leaking pipe. Along with a normal coupling, two other types are the compression coupling and slip coupling.

The compression fitting is connected between two pipes via rubber seals or gaskets on both sides which prevents leaking. A slip coupling includes two pipes, one of which slides out of the other pipe to a various length, to repair a specific length of damaged pipe.


A cross fitting has openings on all four of its ends and can connect four pipes. Cross fittings come with three inlets and an outlet or three outlets and an inlet.

Because they are the connecting point for four pipes, they are under more stress than other types of fittings and typically built tougher than other fittings.

Double Tapped Bushing

This is a type of nipple, but it has threading on both the inside and the outside. Because this center hole is threaded (tapped) from both top and bottom, it’s referred to as double-tapped.

A double tapped bushing is also a type of reducer, but does not have a reducer’s flexibility. A double tapped bushing is usually female.


Not surprisingly, this sort of fitting has a bend that reminds you of the arm joint. They help the flow of water change direction. Elbows come in several degrees, including 22.5, 45, and 90 degrees.

Reducer elbow variations also exist for when the piping diameters being connected are different. Elbow fittings can be made of different materials, and most are female.

Mechanical Sleeve

This connects two pipes through the use of a screw or other device. This makes the fitting easy to install. The mechanical sleeve or coupling is usually made of rubber that is inserted inside a metal jacket (stainless steel clamp).

When the clamp is tightened, it compresses the rubber inside to make a tight seal. Because this fitting can be slightly flexed, it can accommodate small misalignments in hard to install locations.


This is a short fitting that can be made of metals such as copper, brass or steel or chlorinated polyvinyl chloride (CPVC). Instead of connecting two pipes, a nipple connects two fittings.

If it has a continuous threading, it is a closed nipple. They are usually male and come in varying lengths.

Plug and Cap

Plugs and caps are both used to close up pipe openings during inspections and repairs. The main difference is that a plug is male while a cap is female. Most often, caps and plugs are threaded.

Plugs and caps are made of several materials, including metal, plastic or rubber and can be welded, soldered, glued, or threaded into the pipe.


This fitting makes a flow smaller and thus reduces it. Reducers come in two types. The concentric reducer joins two pipes on the same axis, and the eccentric reducer is used to join pipes of different diameters.

The concentric reducer looks like a cone, while eccentric reducers look somewhat like bells with offset center lines. They prevent air bubbles in the pipes.


A tee has an inlet and an outlet and is shaped like the letter “T.” These fittings come in different sizes and are considered sturdier than the cross fitting.

A diverter tee is used in heating systems that use water. They come with directional markings and need to be installed correctly for the system to operate.


Unions can have either male or female threads. They are similar to couplings, but the difference is unions are easy to remove making them convenient for maintenance or a planned future replacement.

A coupling, on the other hand, is more permanent and needs to be cut out. A union contains three parts: nut, male end, and female end. The nut is used to join the male and female ends.


Valves allow the flow of fluids to be adjusted. There are different types, including throttling, non-return and isolation. Non-return valves only allow the liquid to flow in one direction and are often found in drains. They’re also called check valves.

Isolation valves sequester a part of the plumbing system so that the system can be serviced or maintained. These valves are either left open or left closed all the time. However, because they may need to be used in a emergency, they should be checked now and then to see if they’re operational.

Throttling valves control the pressure and amount of a fluid. Because this stresses the mechanism, they tend to wear out faster than other valves. They are usually installed near isolation valves.


Built in the shape of the letter “Y,” this fitting is made to connect three pipes. Y fittings allow the pipes to change their elevations and to branch out into fresh water lines or drains.

Wyes are similar to tee fittings but the smoother angling reduces friction and turbulence in the water. This fitting is most commonly used to connect a vertical drainpipe to a horizontal one.


Do you like reading up on sewer cleaning? Try leaving a remark directly below. We will be delighted to hear your ideas about this blog. Hoping that you visit us again soon. So long as you enjoyed reading our post plz remember to share it. I am grateful for being here. Revisit us soon.


plumbing services

emergency plumbing service

hot water heater installation

residential plumbing

water heater leaking from bottom

Plumbers Maintenance Companies Vancouver

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s